Introduction
The hot melt is thermoplastic adhesive which is based on EVA resin.It can be used in strips, flakes or thin strips. The use method is flexible and diverse and has a wide range of uses.
Typical Properties
|
Size specification |
0.6*40*5000mm(Thickness*width*length) |
|
Softening point |
100℃ |
|
Viscosity @ 160℃ |
120000mpa.s |
|
Density(g/cm3) |
0.92-0.98 |
|
Peel test PE/steel(N/2.5cm) |
≥125 |
|
Open time |
30~60s |
Feature and application
This is a economical EVA hot-melt sheet with 100% solid content .
The use methods are diverse and flexible, including winding and wrapping, cutting into various shapes of sheets for bonding, and cutting into thin strips for filling and sealing.
It can be used for handicrafts, glass, plastic products, furniture and metal, etc.
Good adhesion to polar and non-polar materials.
High bonding strength.
Insulation and sealing.
Size can be customized.
The hot melt sheet must be heated and melted into a liquid to have better adhesion.The use process requires a heating device for heating, such as a hot air gun, a fire gun or an oven. Take care to prevent burns after heating and melting.
When heating with a hot air gun or a fire gun, do not heat a position for a long time to prevent material degradation or carbonization, which will affect the bonding performance. It can move back and forth to evenly heat the hot melt adhesive.
In addition, do not heat it for a long time at more than 200℃ when heating through the oven.
Factory and Certification
Service
1 Free samples can be provided, but you need to pay for shipping.
2 Can be cut into slices to provide sliced products.
3 The size can be customized.
Hot Tags: eva hot melt sheet, China eva hot melt sheet manufacturers, suppliers, factory, adhesion properties, adhesive advantages, adhesive retailers, sign making adhesives, compatible adhesive, stick adhesives
