Description

Technical Parameters

Introduction

This environmentally friendly hot melt adhesive is solid plastic at room temperature, non-toxic, and has low odor while delivering high bonding performance. It can be used for stationery, office supplies, and various applications requiring reliable adhesion.

TYPICAL PROPERTIES

Color and shape	Light yellow/ Round	Visual inspection
Transparency	Translucent	Visual inspection
Softening point (℃)	77-85℃	GB/T 4507
Viscosity @ 160℃*mpa.s	10000±3000mpa.s	Brookfield viscometer
Peel test PE/steel (N/2.5cm)	≥60	GB/T 2790 Specimen width：25mm Speed 100mm/min
Open time	15~45s	Internal procedure
Environmental protection performance	Non-toxic,Passed RoHS Test	Professional testing agency
Density(g/cm3)	0.92-0.98	Internal procedure
Application temperature	160-180℃

Packing specification:25kg per bag.

Features and Applications

100% solid meltable polymer

Solid at room temperature, melts into fluid liquid with viscosity at high temperatures

Reusable, high bonding strength, fast application

Solvent-free, pollution-free, non-toxic

Easy to pack, transport, and store

product-800-800

Notes:

Packaged in woven bags with a waterproof liner.

Store in cool and dry conditions.

Avoid heating the product above 200℃ to prevent degradation.

Do not mix with other manufacturers' products.

Safety Precautions:

In its solid form, the hot melt adhesive poses no health hazards. Once melted, it is a hot molten plastic that can cause burns. Ensure safety by wearing insulated gloves and safety goggles.